Pyne Pod
Pyne Pod 30000 Replacement Pod | Dual Flavour Refill for Pyne Pod Click S Kit
Pyne Pod 30000 Replacement Pod | Dual Flavour Refill for Pyne Pod Click S Kit
Couldn't load pickup availability
Two flavours. One pod. The Pyne Pod 30K refill gives you two fully isolated flavour tanks in a single pod, up to 30,000 puffs, 20mg nicotine salt, and a simple twist-to-switch mouthpiece. The smartest refill for your Pyne Pod Click S kit.
FEATURES
-
Pod System
2-in-1 dual flavour, twist-to-switch mouthpiece
-
Flavours
15+ Refreshing Flavours
-
Modes
Regular (smoother) / Boost (fuller clouds)
-
Puffs Count
30000 Puffs
-
What Is the Pyne Pod 30000 Replacement Pod?
The Pyne Pod 30000 replacement pod is a prefilled, factory-sealed refill designed exclusively for the Pyne Pod Click S 30000 Kit. It connects via a magnetic push-fit system: click in, click out, with zero setup required.
What sets this refill apart from every other pod on the UK market is its 2-in-1 dual flavour system. Each Pyne Pod 30000 refill houses two completely independent E-Liquid tanks inside a single pod body. A simple twist of the mouthpiece switches between Tank A and Tank B in under two seconds: no buttons, no menus, no app.
Up to 30,000 puffs combined across both tanks. Two flavours. One pod.
Pyne Pod 30K Replacement Pod: Key Specifications
| Feature | Detail |
|---|---|
| Puff Count | Up to 30,000 puffs (both tanks combined) |
| Pod System | 2-in-1 dual flavour, twist-to-switch mouthpiece |
| Coil | Advanced mesh coil: even heat distribution |
| Nicotine Strength | 20mg (2%) nicotine salt |
| Draw Style | MTL (Regular mode) / RDL (Boost mode) |
| Activation | Inhale-activated, no buttons |
| Output Modes | Regular (smoother) / Boost (fuller clouds) |
| Display | LED puff counter + mode indicator |
| Connection | Magnetic push-fit: click in, click out |
| Compatibility | Pyne Pod Click S 30000 kit only |
| Compliance | UK TPD / TRPR compliant, MHRA registered |
| Age Restriction | 18+ only: age verification required at checkout |
-
Full Flavour Range: 15 Editions for Pyne Pod 30000 Refills
Every edition in the range is a dual-flavour pod: two complementary profiles in one refill, switchable with a twist. All 15 are available for the Pyne Pod 30000 replacement pod system.
Fruit Editions
- Berry Edition: One sweet berry, one tart. Sharp, refreshing exhale.
- Apple Edition: Crisp eating apple paired with a sweeter baked apple twist. Clean and light.
- Strawberry Edition: Fresh strawberry alongside a candy-sweet version. Full-bodied finish.
- Grape Edition: Deep purple grape paired with a lighter, juicier grape note. Smooth exhale.
- Banana Edition: Smooth ripe banana alongside a contrasting creamy note. Sweet throughout.
- Cherry Edition: One sweet cherry, one sharp. Tart finish.
- Mango Edition: Ripe tropical mango alongside a zesty, sharp version. Tropical exhale.
- Peach Edition: Soft, juicy peach in two styles. Gentle sweetness from first puff to last.
- Pineapple Edition: Sweet on the inhale, sharp on the exhale. Bright tropical duo.
- Red Edition: Strawberry, raspberry, and cherry blend. Sweet and full-bodied.
Citrus & Cool Editions
- Blue Edition: Blue raspberry and blueberry pairing. Sweet with a tart edge.
- Lemonade Edition: Two zesty, fizzy lemonades. Bright and sharp with a clean finish.
- Lime Edition: Dual sharp lime hit. Zesty and refreshing throughout.
Drink & Sweet Editions
- Drinks Edition: Two soft drink-inspired flavours. Lightly fizzy sensation on the exhale.
- Sweet Edition: Two candy-inspired flavours. Full sweetness from start to finish.
Pro tip: Use the twist mouthpiece to match your mood: a citrus profile in the morning, a sweet profile in the evening, all from one single Pyne Pod 30k refill.
How the Dual Flavour System Works in Pyne 30000 Pods
Most replacement pods lock you into a single flavour from first puff to last. Pyne 30000 pods remove that restriction entirely.
Here is exactly how the system works:
- Each Pyne Pod 30k replacement pod arrives with two flavour tanks pre-filled and sealed inside the same pod housing.
- Twisting the mouthpiece physically rotates the internal airflow path, connecting your draw to Tank A or Tank B.
- The two tanks are fully isolated: no shared liquid pathway, no flavour bleed between them.
- One twist. Under two seconds. No buttons, no settings.
In real-world use, the flavour separation holds throughout the full pod life. Switching between a sharp citrus and a sweet berry in the same session produces zero crossover taste. This makes Pyne 30k pods one of the most practical multi-flavour systems available in the UK today.
Coil Performance and Vapour Quality
Every Pyne Pod 30000 replacement pod contains an advanced mesh coil engineered to distribute heat evenly across a wide surface area rather than concentrating it at a single point.
This delivers three measurable benefits compared to standard coil designs:
- Consistent vapour temperature: no hot spots, no fluctuation between puffs
- Steadier flavour delivery: the same taste from puff one to the final draw
- Longer coil lifespan: even wear means the coil degrades more slowly
The coil is factory-tuned for 20mg nicotine salt e-liquid, which vaporises effectively at lower temperatures. This is why even Boost mode produces a smooth throat hit rather than a harsh one.
Priming tip: Always wait 2 to 3 minutes after fitting a new pod before your first draw. Inhaling before the coil has fully saturated will produce a dry, burnt taste that cannot be reversed.
Nicotine Strength: 20mg Nicotine Salt Formula
Every Pyne 30k replacement pod contains 20mg (2%) nicotine salt e-liquid. Nicotine Salts use benzoic acid to lower the pH of the nicotine, which reduces throat harshness and allows faster absorption compared to freebase nicotine at equivalent concentrations.
The 20mg strength sits at the maximum level permitted under UK TRPR regulations, making it suitable for adult smokers seeking a direct substitution for cigarettes. Public Health England guidance supports vaping as a regulated, smoke-free alternative for adults who smoke.
Health Notice: Nicotine is highly addictive. This product is intended for adult smokers only. Not suitable for non-smokers, people under 18, pregnant or breastfeeding women, or those with cardiovascular conditions or seizure disorders. Consult a healthcare professional before use if you have underlying health conditions. For NHS stop-smoking support, visit nhs.uk/smokefree.
How to Use Your Pyne Pod 30000 Refill: Step-by-Step
- Remove the pod from its sealed wrapper.
- Pull off the silicone plug from the base of the pod.
- Slide the pod into your Pyne Pod Click S kit: the magnets click it firmly into place.
- Wait 2 to 3 minutes. This primes the coil and prevents dry hits on your first draw.
- Inhale steadily to activate. No buttons required.
- Twist the mouthpiece to switch between Tank A and Tank B at any point.
Regular Mode vs Boost Mode: Choosing the Right Draw
| Mode | Draw Style | Best For |
|---|---|---|
| Regular | MTL: tight, cigarette-style draw | Smoother flavour, longer pod life, new switchers |
| Boost | RDL: looser, fuller draw | Bigger vapour clouds, stronger throat hit |
-
When to Replace Your Pyne 30000 Pods
A full Pyne Pod 30000 replacement pod delivers up to 30,000 puffs across both tanks combined. For a moderate vaper using both tanks evenly, this typically means one to two weeks of use (approximately 2,500 to 4,000 puffs per day).
Replace your pod when you notice any of the following:
- Flavour becomes noticeably faint or flat in either tank
- A burnt or dry taste appears despite correct priming
- Vapour output drops significantly compared to a fresh pod
- The LED puff counter shows both tanks approaching empty
Tips for Maximum Flavour and Pod Life
- Prime every new pod for 2 to 3 minutes before your first draw: no exceptions
- Take slow, steady draws rather than fast, sharp pulls
- Switch between tanks regularly to distribute coil wear evenly
- Keep your Pyne Pod Click S kit fully charged: a low battery reduces vapour quality
- Store unused Pyne Pod 30k pods upright at room temperature, away from direct sunlight
- Avoid chain vaping (more than three draws in quick succession) to prevent premature coil degradation
Authenticity, Safety, and UK Compliance
The Pyne Pod 30000 refill is fully compliant with the UK Tobacco and Related Products Regulations (TRPR) and the EU Tobacco Products Directive (TPD). It is registered with the MHRA: the UK government body responsible for regulating nicotine-containing products.
Every Pyne 30k replacement pod carries a unique QR code and serial number on its packaging. Scan the QR code to verify your product is genuine and manufactured to specification via the official Pyne Pod verification page.
We source all stock directly from the authorised UK distributor. Counterfeit pods with false MHRA registration numbers do circulate in the market. Always verify before use.
This product is age-restricted. Age verification is required at checkout in compliance with UK law. We do not sell to anyone under 18.
Why Pyne Pod 30000 Pods vs Standard Disposables?
Standard disposable vapes deliver between 600 and 3,500 puffs before the entire device is discarded. One Pyne Pod 30000 replacement pod delivers up to 30,000 puffs: equivalent to 10 to 50 single-use disposables, while only the pod itself goes to waste, not the kit.
This means a significantly lower cost per puff, less waste, and two flavours in one pod rather than carrying separate devices for variety.
When a pod is finished, dispose of it responsibly through a WEEE-compliant battery recycling point. Most major UK supermarkets and electrical retailers now offer this service.
Ordering and UK Delivery
We dispatch orders seven days a week across the UK. Free delivery is available on qualifying orders. Next-day delivery is available at checkout. All orders arrive in plain, discreet packaging. Checkout is secured with SSL encryption.
Every order is covered by our money-back guarantee. If your Pyne Pod 30000 replacement pod arrives damaged or faulty, contact our team within 14 days for a full replacement or refund. We are a Trustpilot-rated UK vape retailer. Our specialist team is available via live chat and email for product guidance, compliance questions, and technical support.
This product contains nicotine. Nicotine is highly addictive. Not suitable for non-smokers, under-18s, pregnant or breastfeeding women, or people with cardiovascular conditions or seizure disorders. Keep out of reach of children and pets.
-
Frequently Asked Questions
-
1. How many puffs does one Pyne Pod 30000 refill deliver?
Up to 30,000 puffs across both flavour tanks combined. Real-world lifespan varies by draw length, usage frequency, and output mode. Boost mode consumes e-liquid faster than Regular mode.
-
2. How does the dual flavour system in Pyne 30000 pods work?
Each pod contains two physically separate e-liquid tanks in a single body. Twisting the mouthpiece rotates the internal airflow path so your inhale draws from Tank A or Tank B. The tanks are fully sealed from each other: no shared pathway, no flavour blending.
-
3. Which device are Pyne Pod 30k replacement pods compatible with?
These refills are designed exclusively for the Pyne Pod Click S 30000 kit. They are not compatible with any other device. Using them with an unsupported kit may result in incorrect fitting, poor performance, or damage.
-
4. What is the difference between Regular and Boost mode?
Regular mode fires at a lower output, producing a tight MTL draw similar to a cigarette. It delivers a smoother flavour and extends pod life. Boost mode fires at a higher output for a looser RDL draw with more vapour and a stronger throat hit. New switchers from cigarettes should start in Regular mode.
-
5. How do I verify my Pyne 30000 pods are genuine?
Scan the QR code on the pod packaging with your smartphone camera. You will be redirected to the official Pyne Pod verification page. A confirmed result means the pod is MHRA-registered and TPD-compliant. If verification fails, do not use the product and contact us immediately.
-
6. Why does my Pyne Pod 30k refill taste burnt?
A burnt taste almost always means the coil was not given enough time to prime after fitting. Always wait a minimum of 2 to 3 minutes before your first draw. Avoid chain vaping and take slow, measured draws. If the burnt taste persists after correct priming, the coil may be defective: contact our team for a replacement.
